$ 7
4.9 (446)
In stock
Arrives by Tomorrow
.
Order within 00 hr 00 min
Save $0.91 off this item after joining.
Description
Product Description Cherry Wood Edge Banding with Hot Melt Adhesive The wood veneer is made of premium quality Cherry wood with smooth surface and natural grain, it can increase the durability of your project as well as give it a perfect finish. The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture,cabinet,plywood,MDF,partical board,OBS board or wooden DIY project. It's easy to use,just apply it to the furniture edging and iron on with a household iron. Size 3: 1-1/2'' × 26'(38mm*8m) Size 4: 7/8'' × 50'(38mm*8m) Size 5: 1/2'' × 50'(38mm*8m) How to Apply for Furniture/Cabinet/Closet/Frame Edge Wood edge banding roll can be applied with an iron, hot air blower or it can be applied with an edgebander machine. Trimming and sanding as required after the glue turning dry. Use a steam iron or dry iron,Do not use steam with water, dry heat is required. Switch to Fleece or similar gear, then hold for about 3 seconds and move forward(Don't press it too long, otherwise it will burn the edges). HIGH QUALITY CHERRY WOOD VENEER EDGING – The real wood edge banding tape is made of high quality natural cherry wood, the pre-glued plywood edge banding is easy to process and durable. EASY TO APPLY- It is pre-glued iron on edge banding with heat melt adhesive to the back. It is super easy to apply with a household iron. The extra strong preglued hot melt adhesive is evenly distributed on the wood veneer edging for a strong, permanent bond This size is finely sanded to perfection, our edge banding can be trimmed if required or lightly sanded down to fit. HOW TO USE-Just secure it in place, run a heated iron over it, press the wood veneer edgebanding with hand after cooling, and then trim any excess with a utility knife If you're unsatisfied with the iron on edge banding or have any questions, please don't hesitate to contact us
